37
If the “RESET” key is not pressed, a continuous beep will sound (except when in
Silent mode available in the “WAKE UP DOORMAN” in the advanced menu) and
the event of “WAKE UP DOORMAN” will be recorded.
If you want the doorman, instead of pressing the “RESET” button, to restart the
function only through biometrics, it will be necessary that it has the ngerprint re-
gistered, as described previously in item 10.2.5. In this case it will be necessary
to identify the ngerprint as being from the IP Module. In order to do so, access
the advanced menu and “WAKE UP DOORMAN”, enable the option “SECURITY
CABIN DEVICE”.
Figure 10.6.c
Figure 10.6.d
Figure 10.6.e
- ENGLISH -
240
To Next Page
Loading...
Need help?
General
