81
The loaded parameters are listed below:
Firmware version Firmware version of the Biometric Con-
troller
Communication password Code for TCP/IP communication (unu-
sed)
Sleep time Time in seconds to hibernate the Biome-
tric Controller display
Volume Controller buzzer sound level
Biometric [0 to 5]
Language Language of the Biometric Controller
menus (read-only option) [English, Spa-
nish, Portuguese and Russian]
Date/Time format Date display format of the date [DD-
MMAA, YYMMDD, MMDDAA] and
time display format [24h, 12h AM/PM]
Attendance state Access event format [0 to 15, where 0
= Input/1 = Output/2 = Pause/3 to 15 =
Congurable]
Fingerprint comparison precision Accuracy of ngerprint validation
Fixed Wiegand head code Fixed Wiegand code [0 to 254]
Wiegand output Wiegand output type of Biometric Con-
troller [w26, Anviz, xed, Linear]
Work code permission Enables the “Fn” key of the Biometric
Controller
Real-time mode Enables Real-Time mode for TCP/IP
communication
FP auto update Enables the smart update of the nger-
prints during validation
Relay mode Biometric Controller relay operation [Ac-
cess, Alarm]
Memory full alarm Event memory full alarm [0 to 5000
events remaining]
Repeat attend. delay Time in minutes to ignore event
of the same access [0 to 250]
- ENGLISH -
284
To Next Page
Loading...
