EasyManua.ls Logo

Nordson EFD E2 - Equipment-Specific Safety Information

Nordson EFD E2
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E Series Automated Dispensing System
11www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Equipment-Specific Safety Information
The following safety information is specic to Nordson EFD automated dispensing systems.
European Community
To meet the requirements of the European Community (CE) safety directives, the robot must be placed in an
enclosure. The enclosure prevents an operator from entering the robot’s work area and generates an emergency
stop signal if the door switch is opened while the robot is running.
WARNING
Install the input / output safety plug only to bypass the door switch. When this plug is installed, the installer assumes
all safety liability.
Installation Location
Do not store, install, or operate the robot in a location where it is exposed to the following:
Temperatures lower or higher than 0–40 °C (50–104 °F) or humidity lower or higher than 20–95%
Direct sunlight
Electrical noise
Flammable or corrosive gases
Dust or iron powder
Sources of splashing water, oil, or chemicals
Radioactive materials, magnetic elds, or vacuum rooms
Power and Grounding
Connect the robot and accessories to a properly grounded power source.
Ensure that the system is connected to the correct voltage.
Operation and Service
Turn on the dust collection system before operating the robot.
Do not drop or spill foreign objects or material, such as screws or liquids, into the robot.
Do not overload the robot.
Do not touch any part of the robot while it is running. Load and unload workpieces or material only when the
robot is stopped.
Disconnect and lock out power to the system before changing xtures or tooling.
Use only a neutral detergent for cleaning. Do not use alcohol, benzene, or thinner.
Refer to the maintenance instructions for a recommended maintenance schedule, detailed cleaning instructions,
and available tools and supplies for servicing the robot.
Nordson EFD Product Safety Statement (continued)

Table of Contents

Related product manuals