E Series Automated Dispensing System
78 www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Accessories
NOTE: For replacement parts, refer to the robot maintenance instructions available at www.nordsonefd.com.
Safety Enclosures
Nordson EFD guarded safety enclosures integrate seamlessly with our complete line of
automated dispensing systems. Featuring external dispensing controls, a safety light curtain,
and an internal electrical control box and wireways for faster, safer setup, these CE-compliant
enclosures also fully comply with EU Machinery Directive 2006/42/EC.
Part # Description Compatible Robot Models
7362738
Small safety enclosure E2, E2V, E3, E3V, R3
7362766
Small safety enclosure, Europe E2, E2V, E3, E3V, R3
7362739
Large safety enclosure E4, E4V, E5, E5V, R4, PRO4L
7362767
Large safety enclosure, Europe E4, E4V, E5, E5V, R4, PRO4L
Pre-Configured Output Cables
Item Part # Description
7360551 Standard cable to connect the dispenser and the robot
7360761
Single voltage initiate cable to connect the dispenser and the robot
(provides different pigtails to connect to different dispensers /
controllers)
7360554
Dual voltage initiate cable to connect up to two dispensers / controllers
to the robot
7362573
I/O interface cable between the ValveMate
™
8000 and the robot when
the use of all four (4) ValveMate 8000 channels are required
7360558
Dual-connector cable to connect up to two PICO
®
DCON Drivers or two
PICO Toµch
™
controllers to the robot
7362356
Dual-connector cable to connect up to two Liquidyn
®
V10 controllers to
the robot
7362357
Dual-connector cable to connect up to two Liquidyn V200 controllers to
the robot
7362373
Single-connector cable to connect a Liquidyn V200 controller to the
robot
n/a 7015086 DB9 female straight serial cable (for RS-232 connection)
n/a 7015476 USB-to-serial converter cable
To Next Page
Loading...
