- 57 -
Table of Setting Items in the Control Panel Menu Screen
Cutter Setup
z
Shaded areas are factory-set values.
Item Value Description
Cut Mode Job
Collation
Specified Interval
Specifies the cutting operation.
Job:
Cuts at the end of a job.
Collation:
Cuts at the end of the job and at the end of the job collation.
Specified Interval:
Cuts in units of the specified number of pages. Cuts at the end
of the collation/job.
Cut Interval 1
～
9999
Sets how many pages are cut each time.
Appears when the [Cut Mode] is [Specified Interval].
To Next Page
Loading...
