Omron fh-1 series User Manual

A - 41
Appendices
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
A-14 Operation log input information list
A
GetImageLogInfo Acquires the specified image logging information. Refer to Getting the Speci-
fied Image Logging Infor-
mation. (P.A-46).
GetIoModuleIdent Acquires the identifier name for an I/O module. Refer to Getting an I/O
Module Identifier Name
(P.A-47).
GetLanguageIdent Acquires the language identifier. ---
GetMeasureOut Acquires the measurement result output yes/no.
*1
GetPort Executes individual input of parallel I/O terminal states.
*1
GetSceneCount Acquires the count of usable scenes. ---
GetSceneDescription Acquires the count of usable scenes. ---
GetSceneGroupCount Acquires the count of the valid scene groups on the
memory card.
---
GetSceneGroupNo. Acquires the current scene group No. ---
GetSceneGroupTitle Acquires the scene group title name. ---
GetSceneMaker Acquires the scene maker name. ---
GetSceneNo Acquires the current scene No. ---
GetSceneTitle Acquires the scene title name. ---
GetSecurityParameter Acquires security related parameters. Refer to Getting Security
Related Parameters
(P.A-47).
GetSystemData Acquires the system data.
*1
GetUnitDataN Acquires processing unit data. ---
GetUnitDataN2 Acquires processing unit data. ---
GetUnitDataS Acquires processing unit data. ---
GetUnitDataS2 Acquires processing unit data. ---
GetUnitFigure Acquires processing unit figure data.
*1
GetUnitItemIdent Acquires the identifier name for a processing item. ---
GetUnitItemIdent2 Acquires the identifier name for a processing item. ---
GetUnitTitle Acquires a processing unit title name. ---
GetUnitTitle2 Acquires a processing unit title name. ---
ImageLogging Executes image logging. ---
ImageUpdate Updates image data.
*1
InsertUnit Inserts a processing unit.
*1
IoInitialize Executes I/O initialization. Refer to Executing I/O Ini-
tialization (P.A-48).
LoadBackupData Load the System + Scene group data
*1
LoadProc Executes load processing for unit data. ---
LoadScene Loads scene data.
*1
LoadSceneGroup Reads scene group data.
*1
LoadSceneGroup0 Executes load processing for scene group data. ---
LoadSecurityData Loads security related settings. Refer to Loading Security
Related Settings (P.A-48).
LoadSystemData Loads system data.
*1
LoadUnitData Loads processing unit data.
*1
LockMeasureStop Sets measurement trigger input to disabled. Refer to Setting Measure-
ment Trigger Input to Dis-
abled (P.A-48).
Measure Executes measurement processing.
*1
MeasureInit Executes unit measurement initialization processing. ---
MeasureOut Executes measurement results display processing. ---
MeasureProc Executes unit measurement processing.
*1
MeasureStart Sets measurement trigger input to enabled.
*1
MeasureStop Sets measurement trigger input to disabled.
*1
Name Description References

Omron fh-1 series Specifications

General

Brand	Omron
Model	fh-1 series
Category	Machine Vision Systems
Language	English