Appendices
G-20
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
G-12-6 Format UPC-E as UPC-A (UPC/EAN)
Definition: When disabled, the reader will output the version E symbols in their
encoded 6-character format.
When enabled, the reader will format the symbol as either a 12-character
UPC-A symbol or an EAN-13 symbol, depending on the state of the EAN
status parameter. This formatting reverses the zero suppression that is
used to generate the symbol in the UPC specification.
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: Enabled
Options: 0 = Disabled 1 = Enabled