Appendices
H-40
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
H-17-5 ISO/IEC 15416 Symbol Quality Output 2
Serial Cmd: <
K881
, output on overall grade, overall grade threshold, edge determination,
edge determination threshold, decode, decode threshold, contrast, contrast
threshold, min reflectance, min reflectance threshold, min edge contrast, min
edge contrast threshold, modulation, modulation threshold, defects, defects
threshold, decodability, decodability threshold, quiet Zone, quiet zone
threshold >
H-17-6 ISO/IEC 29158 Symbol Quality Output 2
Serial Cmd: <
K891
, output on overall grade, overall grade threshold, cell contrast, cell
contrast threshold, cell modulation, cell modulation threshold, fixed pattern
damage, fixed pattern damage threshold, axial non-uniformity, axial non-
uniformity threshold, grid non-uniformity, grid non-uniformity threshold,
unused ECC, unused ECC threshold>
H-17-7 Diagnostics Output 2
Serial Cmd: <
K791,
unused 1,service unit>
H-17-8 Configurable Output 3
Serial Cmd: <
K812,
output on,output state,pulse width,output mode>
To Next Page
Loading...
