2 Quick Start
2-10
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
Daisy Chain is useful in applications where:
• More than one symbol type is present;
• A symbol may be present on multiple sides of a package;
• Symbols are presented at different depths;
• Multiple readers are required to cover a large field of view;
• There is a need to find a symbol on a circular object in any orientation.
A Daisy Chain consists of one parent and one or more child devices. The child devices report their
data to the parent, which then reports the data to the network, effectively allowing all readers to act as
one. In other words, the outside world interacts with one unit – the parent reader.
The Device Discovery Utility (DDU) is used to configure the Daisy Chain group where the parent
reader and the child readers are defined. The parent reader interacts with a host computer or PLC. A
parent reader that receives a trigger will send a trigger to each of the child readers. Any symbol
decoded by the child readers will be communicated to the parent, which collects all of the decodes from
the children and will communicate them to the host.
Overview of Setup Process
Use the Device Discovery Utility to define the Daisy Chain group, the parent reader, and the child
readers.
Use WebLink to configure each of the readers in the Daisy Chain group as desired for the application.
Tips
The parent reader should:
• Configure for application requirements: Match String, Format Output, Trigger, (Digital) Outputs, etc.
The child readers should:
• Use a Triggered cycle, such as External Edge.
• Use a timeout that occurs before the end of read cycle on the parent reader.
Parent and child readers should:
• Save settings to the flash memory of the readers.
2-2-4 Configure Daisy Chain (If Required by Application)
To Next Page
Loading...
Need help?
General
