Omron NX Series - Page 174

To import all variables with a Network Publish attribute, click the Yes
Button. To import only
some of these variables, click the No Button.
After you import the variables to the tags, click the Yes Button to automatically create tag sets,
or click the No Button to set up tag sets manually.
If you select the Yes
Button in the previous step, the variables will be imported as shown below
on the Tag Sets Tab Page. Each variable will be imported into a separate tag set and the de-
vice parameters will be automatically edited. (The variable name will be used for the tag set
name.)
9 Tag Data Link Functions
9-30
NX-series EtherNet/IP Unit User's Manual (W627)