Omron NX Series User Manual

1
Features and System Configura-
tion
This section describes the features, system configuration, introduction to communica-
tions services, and Support Software of the NX-series EtherNet/IP Unit.
1-1
Features .......................................................................................................... 1-2
1-1-1 EtherNet/IP Features....................................................................................... 1-2
1-1-2 Features of NX-series EtherNet/IP Units......................................................... 1-2
1-2 System Configuration.................................................................................... 1-6
1-3 Introduction to Communications Services.................................................. 1-8
1-3-1 CIP (Common Industrial Protocol) Communications Services ........................ 1-8
1-3-2 IP Routing...................................................................................................... 1-10
1-3-3 Packet Filter ...................................................................................................1-11
1-3-4 BOOTP Client.................................................................................................1-11
1-3-5 Specifying Host Names ..................................................................................1-11
1-3-6 SNMP Agent.................................................................................................. 1-12
1-3-7 LLDP ............................................................................................................. 1-13
1-4 Support Software ......................................................................................... 1-14
1-1
NX-series EtherNet/IP Unit User's Manual (W627)
1

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model