Omron NX Series User Manual

A-4
EDS File Management
This section describes the EDS file management on the Network Configurator.
Precautions for Correct Use
We recommend that you select Run as administrator to start the Network Configurator for op-
erations with EDS files.
If you do not select Run as administrator, the following condition will result according to Win-
dows user management for security purposes.
The following operations are not valid if you log in with another user account, and you need to
restart the Network Configurator again: Install, Create, Delete, and Create EDS Index File un-
der EDS File.
When you start the Network Configrator, select Run as administrator as below.
1. Select the Network Configurator from the Start Menu, and then right-click.
2. Select Run as administrator from the displayed pop-up menu.
A-4-1
Installing EDS Files
EDS File - Install
The Network Configurator can support new devices if the proper EDS files are installed.
T
o install the EDS file, use the following procedure.
1 Select
EDS File -
Install.
The Install EDS File Dialog Box is displayed.
2 Select the EDS file to install, and click the Open Button.
Appendices
A-43
NX-series EtherNet/IP Unit User's Manual (W627)
A-4 EDS File Management
A
A-4-1 Installing EDS Files

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English