Omron NX Series User Manual

Introduction
Thank you for purchasing an NX-series EtherNet/IP Unit.
This manual contains information that is necessary to use the NX-series EtherNet/IP Unit. Please read
this manual and make sure you understand the functionality and performance of the NX-series Ether-
Net/IP Unit before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (electrical engineers or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.
Applicable Products
This manual covers the following products.
• NX-series EtherNet/IP Unit
NX-EIP201
Introduction
1
NX-series EtherNet/IP Unit User's Manual (W627)

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English