Omron NX Series - 14-5 Checking with Device Variables

14-5
Checking with Device Variables
You can check the status of current Controller errors in the X Bus Ethernet Function Module, X Bus
EtherNet/IP Function Module, and X Bus Unit Common Function Module with the device variables.
Refer to Section 6 Device Variables Related to the NX-series EtherNet/IP Unit on page 6-1 for details
on the device variables of the X Bus Ethernet Function Module and X Bus EtherNet/IP Function Mod-
ule.
Refer to Specifications for Individual Device Variables in the NJ/NX-series CPU Unit Software User’s
Manual (Cat. No. W501) for details on the device variables of the X Bus Unit Common Function Mod-
ule.
14 Troubleshooting
14-46
NX-series EtherNet/IP Unit User's Manual (W627)