Omron NX Series User Manual

Select an output tag set from the Target Device
Area on the right side of the Edit
Connection Dialog Box, and then select an input tag set to receive the output tag set in the
Originator Device Area on the left.
• If there is no applicable input tag set at the originator, you can create a new one by using
the Edit Tag Sets Button and the Edit Tag Button.
• Using Other EtherNet/IP Devices as Target
The Connection I/O Type list box in the upper part of the Edit Connection Dialog Box lists
connection I/O types. Select a connection I/O type according to your application.
•
The connection I/O types that can be selected depend on the target device.
• Items that can be selected depend on the connection I/O type that is selected.
• Select the output, input, or both output and input tag sets at the target and specify the cor-
responding input, output, or both input and output tag sets at the originator.
• If there is no applicable tag set at the originator, you can create a new one by using the
Edit Tag Sets Button and the Edit Tag Button.
The following view will appear when you click the Show Detail Button.
9 Tag Data Link Functions
9-47
NX-series EtherNet/IP Unit User's Manual (W627)
9-2 Setting Tag Data Links
9
9-2-7 Creating Connections by Dragging and Dropping De- vices

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model