Omron NX Series User Manual

3 Select Device - Reset.
You can also right-click the icon and select Reset
from the pop up menu.
4 The following dialog box is displayed.
• If you click the Yes
Button:
The following dialog box is displayed.
Restart the device.
Clear the tag data link settings and restart
the device.
NOTE : The Controller will not be restarted.
Select the Initialize tag data link configuration, and then emulate cycling power Option,
and then click the OK Button.
9 Tag Data Link Functions
9-64
NX-series EtherNet/IP Unit User's Manual (W627)

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model