EasyManuals Logo

Omron NX Series User Manual

Omron NX Series
464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #275 background imageLoading...
Page #275 background image
MIB Groups
MIB group Stored information
Standard MIB system group The MIB for information related to the de-
vice.
interfaces group The MIB for information related to the inter-
face.
ip group ip The MIB for IP information.
ipAddrTable The MIB for addressing table information re-
lated to IP addresses.
ipRouteTable The MIB for information related to IP routing
tables.
ipNetToMediaTable The MIB for information related to IP ad-
dress conversion tables.
ipForward The MIB for information related to IP for-
warding tables.
icmp group The MIB for ICMP information.
tcp group tcp The MIB for TCP information.
udp group udp The MIB for UDP information.
snmp group snmp The MIB for SNMP information.
lldp group The MIB for LLDP information.
Detailed Descriptions of MIB Objects
l
System Group
Subtree name Standard [(identifier) attribute] Support
Implementation spec-
ifications
sysDescr [(1) RO]
Device information (including hardware, OS,
software names, and versions)
ASCII characters only.
Support-
ed
"OMRON Corporation
"
+ CPU Unit model +
CPU Unit version
CPU Unit model (ex-
ample): NJ501-1200
CPU Unit version
(example): Version
1.0
sysObjectID [(2) RO]
Vendor OID.
Tells where this device information was as-
signed in the private MIB.
Support-
ed
1.3.6.1.4.1.16838.1.10
25.5
sysUpTime [(3) RO]
The time elapsed since the system was start-
ed (unit: 1/100 s).
Support-
ed
According to the stand-
ard.
sysContact [(4) RW]
How to contact the administrator and infor-
mation on the administrator.
Support-
ed
Set by the user
.
sysName [(5) RW]
The name for management. Sets the full do-
main name of the device.
Support-
ed
Host Name
11 SNMP Agent
11-5
NX-series EtherNet/IP Unit User's Manual (W627)
11-1 SNMP Agent
11
11-1-4 MIB Specifications

Table of Contents

Other manuals for Omron NX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron NX Series and is the answer not in the manual?

Omron NX Series Specifications

General IconGeneral
Programming LanguagesLadder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication PortsEthernet, USB, RS-232C, RS-485
Memory CapacityVaries by model
Program MemoryVaries by model
Data MemoryVaries by model
Operating Temperature0°C to 55°C
Power Supply24 VDC
Ethernet Ports1 or 2 ports (depending on model)
USB Ports1 or 2 ports (depending on model)
DimensionsVaries by model
WeightVaries by model

Related product manuals