Omron NX Series User Manual

Subtree name Standard [(identifier) attribute] Support
Implementation spec-
ifications
ifOperStatus [(8) RO]
The current status of the interface.
You cannot send normal packets in the test-
ing state.
up (1)
down (2)
testing (3)
Support-
ed
According to the stand-
ard.
ifLastChange
[(9) RO]
The sysUpTime (in 0.01 seconds) at the last
change in ifOperStatus for this interface.
Support-
ed
According to the stand-
ard.
ifInOctets
[(10) RO]
The number of octets received through this
interface. This includes framing characters.
Support-
ed
According to the stand-
ard.
ifInUcastPkts [(11) RO]
The number of unicast packets reported to a
higher level protocol.
Support-
ed
According to the stand-
ard.
ifInNUcastPkts [(12) RO]
The number of non-unicast packets (broad-
cast or multicast packets) reported to a high-
er level protocol.
Support-
ed
According to the stand-
ard.
ifInDiscards [(13) RO]
The number of packets that had no errors but
could not be passed to a higher level protocol
(i.e., the number of packets received but dis-
carded due to a buf
fer overflow).
Support-
ed
According to the stand-
ard.
ifInErrors
[(14) RO]
The number of packets discarded because
they contained errors.
Support-
ed
According to the stand-
ard.
ifInUnknown-
Protos
[(15) RO]
The number of packets received, but discard-
ed because they were of an illegal or unsup-
ported protocol.
For example, Ethernet packets did not have
IP set for the field that identifies their higher
level protocol.
Support-
ed
According to the stand-
ard.
ifOutOctets [(16) RO]
The number of octets of packets sent through
this interface.
This includes framing characters.
Support-
ed
According to the stand-
ard.
ifOutUcastPkts [(17) RO]
The number of unicast packets sent by high-
er level protocols.
This includes discarded packets and unsent
packets.
Support-
ed
According to the stand-
ard.
ifOutNU-
castPkts
[(18) RO]
The number of non-unicast packets sent by
higher level protocols.
This includes discarded packets and unsent
packets.
Support-
ed
According to the stand-
ard.
11 SNMP Agent
11-7
NX-series EtherNet/IP Unit User's Manual (W627)
11-1 SNMP Agent
11
11-1-4 MIB Specifications

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model