Omron NX Series - Page 280

Subtree name Standard [(identifier) attribute] Support
Implementation spec-
ifications
ipReasmOKs [(15) RO]
The number of IP datagrams received that
were successfully reassembled.
Support-
ed
According to the stand-
ard.
ipReasmFails [(16) RO]
The number of IP datagrams received that
were not successfully reassembled.
Support-
ed
According to the stand-
ard.
ipFragOKs [(17) RO]
The number of IP datagrams that were suc-
cessfully fragmented.
Support-
ed
According to the stand-
ard.
ipFragFails [(18) RO]
The number of IP datagrams that were not
successfully fragmented. (For example, be-
cause the Don't Fragment flag was set for the
IP datagram.)
Support-
ed
According to the stand-
ard.
ipFragCreates [(19) RO]
The number of IP datagrams created as a re-
sult of fragmentation.
Support-
ed
According to the stand-
ard.
ipAddrTable [(20) NA]
An address information table for IP address-
es.
--- ---
ipAddrEntry [(1) NA]
Row data of address information for IP ad-
dresses. The index is ipAdEntAddr.
--- ---
ipAdEntAddr [(1) RO]
The IP address.
Support-
ed
According to the stand-
ard.
ipAdEntIfIndex [(2) RO]
The index value of the interface that this en-
try applies to. This is the same value as ifIn-
dex.
Support-
ed
According to the stand-
ard.
ipAdEntNet-
Mask
[(3) RO]
The subnet mask for the IP address of this
entry
.
Support-
ed
According to the stand-
ard.
ipAdEntBcas-
tAddr
[(4) RO]
The value of the least significant bit of the ad-
dress when an IP broadcast is sent. An ad-
dress represented by all 1 bits is used for
broadcasting as an Internet standard. In that
case, this value is always 1.
Support-
ed
According to the stand-
ard.
ipAdEntReasm-
MaxSize
[(5) RO]
The maximum IP packet size that can be re-
assembled from IP fragmented input IP data-
grams received through the interface.
Support-
ed
According to the stand-
ard.
ipRouteT
able [(21) NA]
The IP routing table for this entity
.
---
---
11 SNMP Agent
11-10
NX-series EtherNet/IP Unit User's Manual (W627)