Name Standard [(identifier) attribute]
Sup-
port
Implementation
specifications
lldpLocManAd-
drOID
[(6) RO]
The ID that identifies the hardware
component or protocol type of the lo-
cal system.
Sup-
ported
SNMPv2-SMI::zer-
oDotZero
lldpV2RemoteSystemsData [(4) NA]
The MIB for information regarding the
remote system that is connected to
the LLDP local system.
--- ---
lldpRemTable [(1) NA]
The table of information from the re-
mote system.
--- ---
lldpRemEntry [(1) NA]
The table entry of information from
the remote system.
--- ---
lldpRemChassi-
sIdSubtype
[(4) RO]
The chassis type for the remote sys-
tem.
Sup-
ported
According to the
standard.
lldpRemChassi-
sId
[(5) RO]
The chassis ID for the remote sys-
tem.
Sup-
ported
According to the
standard.
lldpRemPortId-
Subtype
[(6) RO]
The type indicating the port ID for the
remote system.
Sup-
ported
According to the
standard.
lldpRemPortId [(7) RO]
The port ID for the remote system.
Sup-
ported
According to the
standard.
lldpRemPort-
Desc
[(8) RO]
The description (string) to identify the
port of remote system.
Sup-
ported
According to the
standard.
lldpRemSys-
Name
[(9) RO]
The system name for the remote sys-
tem.
Sup-
ported
According to the
standard.
lldpRemSys-
Desc
[(10) RO]
The description (string) to identify the
remote system.
Sup-
ported
According to the
standard.
lldpRemSy-
sCapSupported
[(11) RO]
The bitmap representation of the list
of functions supported by the remote
system.
Sup-
ported
According to the
standard.
lldpRemSysCa-
pEnabled
[(12) RO]
The bitmap representation of the list
of functions running on the remote
system.
Sup-
ported
According to the
standard.
lldpRemManAddrTable [(2) NA]
The table of management address
control on the remote system.
--- ---
lldpRemManAddrEntry [(1) NA]
The table entry of management ad-
dress on the remote system.
--- ---
11 SNMP Agent
11-23
NX-series EtherNet/IP Unit User's Manual (W627)
11-1 SNMP Agent
11
11-1-4 MIB Specifications
To Next Page
Loading...
