Omron NX Series - Page 398

Connection status
Source of error
Handling
General
Status
(hex)
Additional
Status
(hex)
Configuration
1
Configuration
2
Configuration
3
OMRON error code
01 0810 Error code returned from target: The meaning
of this error
code is defined
by each ven-
dor
, so it de-
pends on the
target's specifi-
cations.
(Contact the
target device's
manufacturer
.)
The meaning of
this error code
is defined by
each vendor,
so it depends
on the origina-
tor's specifica-
tions.
(Contact the
originator devi-
ce's manufac-
turer.)
01 0811 Error code generated by originator: The error will
be recovered
automatically.
The meaning
of this error
code is defined
by each ven-
dor, so it de-
pends on the
target's specifi-
cations.
(Contact the
target device's
manufacturer
.)
The meaning of
this error code
is defined by
each vendor,
so it depends
on the origina-
tor's specifica-
tions.
(Contact the
originator devi-
ce's manufac-
turer.)
14 Troubleshooting
14-62
NX-series EtherNet/IP Unit User's Manual (W627)