Variable name ETN_Port1Status.BootpErr
Meaning Port1 BOOTP Server Error Global/local Global
Function Indicates that a BOOTP server connection failure occurred on the communications port 1.
TRUE: There was a failure to connect to the BOOTP server (timeout).
F
ALSE: The BOOTP is not enabled, or BOOTP is enabled and an IP address was normally obtained from the
BOOTP server
.
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Do not publish.
Usage in user pro-
gram
Possible. Related in-
structions
---
Variable name ETN_Port2Status.BootpErr
Meaning Port2 BOOTP Server Error Global/local Global
Function Indicates that a BOOTP server connection failure occurred on the communications port 2.
TRUE: There was a failure to connect to the BOOTP server (timeout).
F
ALSE: The BOOTP is not enabled, or BOOTP is enabled and an IP address was normally obtained from the
BOOTP server
.
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Do not publish.
Usage in user pro-
gram
Possible. Related in-
structions
---
Variable name ETN_TcpAppCfgErr
Meaning TCP Application Setting Error Global/local Global
Function TRUE: At least one of the set values for a TCP application is incorrect. Or, a read operation failed.
F
ALSE: Normal
Data type BOOL Range of values TRUE or F
ALSE
R/W access R Retained Not retained. Network Publish Do not publish.
Usage in user pro-
gram
Possible. Related in-
structions
---
Variable name ETN_IPRTblErr
Meaning IP Router Table Setting Error Global/local Global
Function Indicates that the default gateway settings or IP router table settings are incorrect. Or, a read operation failed.
TRUE: Setting incorrect or read failed.
FALSE: Normal
Data type BOOL Range of values TRUE or F
ALSE
R/W access R Retained Not retained. Network Publish Do not publish.
Usage in user pro-
gram
Possible. Related in-
structions
---
Variable name ETN_DNSCfgErr
Meaning DNS Setting Error Global/local Global
Function Indicates that the DNS or hosts settings are incorrect. Or, a read operation failed.
TRUE: Setting incorrect or read failed.
FALSE: Normal
Data type BOOL Range of values TRUE or FALSE
R/W access R Retained Not retained. Network Publish Do not publish.
6 Device Variables Related to the NX-series EtherNet/IP Unit
6-20
NX-series EtherNet/IP Unit User's Manual (W627)
To Next Page
Loading...
