Panasonic MN101L Series

Chapter 9
16-bit Timer
IX - 12 16-bit Timer Control Registers
 Timer 7 Mode Register 3 (TM7MD3: 0x03FBE)
..
When IGBT output operation is not used, set the following.
TM7MD3.T7IGBTEN = 0
TM7MD3.T7IGBT1-0 = 00
..
..
WHen the capture function is not used, set the TM7MD3.TM7CKSMP to "0".
..
bp76543210
Bit name
TM7CK
SMP
-
TM7CK
EDG
T7IGBTTR T7IGBTDT T7IGBTEN T7IGBT1-0
At reset00000000
Access R/W R R/W R/W R/W R/W R/W R/W
bp Bit name Description
7 TM7CKSMP
Select sampling clock for capture
0: Count clock
1: SYSCLK
6 - Always read as 0.
5 TM7CKEDG
Select count edge of TM7IO
0: Falling edge
1: Both edges
4T7IGBTTR
Select trigger level
0: High
1: Low
3T7IGBTDT
Input timing of IGBT dead time
0: Falling edge
1: Rising edge
2T7IGBTEN
IGBT enable
0: Disabled
1: Enabled
1-0 T7IGBT1-0
Select IGBT/Timer activation source
00: Timer 7 count operation
01: External Interrupt 0 input signal
10: External Interrupt 1 input signal
11: External Interrupt 2 input signal