Panasonic MN101L Series

Chapter 9
16-bit Timer
16-bit Timer Capture Function IX - 45
 Binary Counter Clear Function at Capture (Timer 7 and Timer 8)
When selecting the external interrupt input signal or Timer 0, 1 interrupt as a capture trigger, the binary counter
can be cleared at a capture operation. When clearing the binary counter at a capture operation, set the
TMnMD4.TnCAPCLR to "1". However, the binary counter can be cleared only during the timer count operation.
Figure:9.8.4 Binary Counter Clear Function at Capture (Timer 7 and Timer 8)
C
ount
c
lock
T
MnEN
b
it
C
ompare
r
egister 1
B
inary
c
ounter
C
apture
r
egister
0000 0001 0002N 0001 0002 0003 0004 0000 0001 0002 0003 000
4
0005 00060000
C
apture
t
rigger
0002 0006
N