Panasonic MN101L Series

Chapter 9
16-bit Timer
16-bit High-Precision IGBT Output (with Variable Period/Duty) IX - 53
 Count timing of High-Precision IGBT Output (Normal) (Timer 7)
Figure:9.10.1 Count timing of High-Precision IGBT Output (Normal)
• (A) Once the IGBT trigger is input, the IGBT operation is valid at the next clock. After the IGBT operation
becomes valid, the IGBT output holds "Low" until the next count clock
• (B) While the IGBT trigger is valid and the binary counter counts up from "0x0000" to the TM7OC2 compare
match, the IGBT output is "High". (Only for the 1st cycle of counting, the output is "High" from
"0x0001".)
• (C) After the TM7OC2 compare match, the output changes to "Low". The binary counter continues counting
up until it is cleared by the TM7OC1 compare match.
• (D) When the binary is cleared, the IGBT output returns to "High".
• (E) When the IGBT trigger becomes invalid, the timer is initialized and the IGBT output is forced to be
"Low".
N
M
I
GBT
t
rigger
0000 0001 0002
T
M7IO output
(
IGBT output)
M-1 M M+2M+1 N-1 N
T
M8IO output
(
IGBT output)
0000 0001 L-1 L 0000
(A) (B) (C) (D) (E)
C
ount
c
lock
T
M7EN
b
it
C
ompare
r
egister 1
C
ompare
r
egister 2
B
inary
c
ounter