Adjustment
112
13.23.01 Cold start
All newly created or modified programs as well as all changed parameter set-
tings are deleted when performing a cold start!
The machine memory is deleted or reset to the factory setting.
Switch on the machine and call up input mode.
Call up the service menu.
Call up cold start.
Confirm “Perform a cold start”.
Description of further functions
Input mode
This function is used to change the initial status of input mode.
Service menu
This function is used to return to the service menu, see chapter 13.23 Service menu.
Conclude input
This function is used to conclude the input and the machine switches to sewing mode.
Esc
The input is interrupted.
To Next Page
Loading...
