Adjustment
113
Description of the functions
Input mode
This function is used to change the initial status of input mode.
Service menu
This function is used to return to the service menu, see chapter 13.23 Service menu.
Conclude input
This function is used to conclude the input and the machine switches to sewing mode.
Ironing compensation strip feeder
This function is used to enter whether the ironing compensation strip feeder option is or is
not attached.
Vacuum motor
This function is used to enter whether the vacuum motor option is or is not attached.
13.23.02 Machine configuration
The machine control unit receives the necessary information about the attached
components with the machine configuration. Care must be taken to make the appropriate
adjustments in the machine configuration if the machine components are changed.
Switch on the machine and call up input mode.
Call up the service menu.
Call up the menu for entering the machine configuration.
To Next Page
Loading...
Need help?
General
