Sewing
36
10 Sewing
The machine may only be operated by properly instructed personnel! The oper-
ating personnel must make sure that only authorised persons are in the danger
zone of the machine!
The sewing mode is available for the production in particular in addition to input mode, see
chapter 11 Input. All relevant functions and settings for the production are shown here
on the display depending on the program selection and the machine status. The machine
normally works in automatic mode but it can be switched to manual mode to set up and test
processes.
The following conditions must be fulfilled for the production:
O All safety devices must be fitted and all covers must be closed, see chapter 1.06 Hazard
information.
O The machine must be set up and started up properly as explained in chapter 8 Set-up
and initial start-up.
O All set-up work must have been carried out, see chapter 9 Set-up.
To Next Page
Loading...
Need help?
General
