Operating Controls
19
7.07 Start keys
The sewing cycle is started by pressing the two start keys 1 at the same time.
After processing the sewing cycle, the lit start keys 1 show that the next
sewing cycle can be started.
When the threading aid function is active, the infeed table is moved forward and the
hook area of the sewing head becomes accessible after pressing both of the start keys 1
at the same time.
Fig. 7 - 07
1
1
7
.08 Key for small parts stacker
Pressing the key 1 switches the small
parts stacker on or off.
Fig. 7 - 08
1
To Next Page
Loading...
Need help?
General
