Set-up and Initial Start-up
25
Move the machine to home position after booting up the machine control unit to confirm
the switch-on process.
Switch on the suction air blower if necessary, see chapter 7.03 Switch for the suction
air blower.
Carry out a test run, see chapter 10 Sewing.
Switch the machine off
Switch off the main switch.
Description of further functions on the display
Input menu
This function is used to call up input mode, see chapter 11 Input.
8.03 Switching the machine on / off
Switch the machine on
Switch on the main switch, see chapter 7.01 Main switch.
Switch on the machine control unit, see chapter 7.02 Push-buttons on the machine
control unit.
To Next Page
Loading...
