Sewing
41
Threading aid function
This function activates the threading aid function, for example, see chapter 9.01 Inserting
the needle.
Stacker up/down
This function is used to move the stacker up or down.
Stop
(The function appears only during the sewing process.)
This function is used to stop the sewing process.
Start
(The function appears only when the sewing process has been stopped.)
This function is used to start the sewing sequence.
Home position
This function is used to move the machine to home position.
10.03 Sewing in manual mode
O Switch on the machine, see chapter 8.03 Switching the machine on / off.
O Call up manual sewing.
O Switch on the suction of the positioning tube or infeed table, see chapter 7.06 Pedal.
O Insert the workpiece, see chapter 10.01 Inserting the workpiece.
Description of the functions on the display
Menu to input the program number
This functions opens the menu for inputting the program number, see chapter 9.07
Selecting a program number.
Input menu
This function is used to call up input mode, see chapter 11 Input.
To Next Page
Loading...
Need help?
General
