Maintenance and Care
60
Fig. 12 - 01
12.03 Cleaning the needle area and hook area
Switch the machine on.
Call up the threading aid function.
The transport rail moves out of the needle area, the presser foot is lowered and the
sewing start is disengaged.
Press both start keys at the same time, see chapter 7.07 Start keys.
The infeed table moves forward and the hook area of the sewing head becomes
accessible.
Clean the hook and hook area several times a day.
Move the machine to the last position prior to the cleaning
or
Move the machine to home position.
To Next Page
Loading...
Need help?
General
