Input
56
11.04 Rights of access
The functions that can be called up with the control panel are classified by code numbers
and can be protected from unauthorised access. To this end, the control unit differentiates
between three user groups (user 1, 2 and 3), all of which can be assigned a corresponding
PIN. If a function is selected for which the user does not have authorisation, the user is
requested to input a PIN. The selected function is carried out after the appropriate PIN has
been entered. In addition to the 3 user groups, the control unit also recognises the so-called
"super user" who has a key switch to access all functions and who is authorised to stipulate
the rights of access.
Enter the key switch and switch on the machine.
Call up input mode.
Call up the menu for inputting the rights of access.
Description of the functions
Input mode
This function is used to change the initial status of input mode.
Conclude input
This function is used to conclude the input and the machine switches to sewing mode.
PIN input
These functions can be used to stipulate an individual PIN for each user.
Function selection
These functions are used to select the code number for the function to be locked or
released.
Lock/release functions
These functions are used to lock or release the selected function for the appropriate users.
To Next Page
Loading...
Need help?
General
