Safety
8
1.03 Safety symbols
Hazard point!
Special points of attention
Risk of injury to operating personnel and technical staff!
Danger area due to laser beam!
Attention!
Do not operate without the finger guard and safety cov-
ers!
Turn off the main switch before set-up, maintenance
and cleaning work!
Only one person in the work area!
Only one person may be in the work area of the machine during operation!
Do not lean on!
The feed mechanism can be damaged if you lean on the infeed table!
1.04 Special points of attention for the owner-operator
This instruction manual is a part of the machine and must be made available to the
operating personnel at all times.
The instruction manual must have been read before the initial start-up.
The operating personnel and technical staff must be instructed about the machine's
safety covers and about safe working methods.
The owner-operator may only operate the machine in a flawless condition.
The owner-operator must ensure that no safety covers are removed or disabled.
The owner-operator must ensure that only authorised persons work on the machine.
Additional information can be requested from the responsible sales centre.
To Next Page
Loading...
Need help?
General
