Set-up
28
9.02 Threading the needle thread / adjusting the needle thread tension
Fig. 9 - 02
Switch on the machine, see chapter 8.03 Switching the machine on / off.
Call up the threading aid function.
The workholder bar moves out of the needle area, the presser foot is lowered and the
sewing start is disengaged.
Thread the needle thread as shown in Fig. 9 - 02. Please ensure that the needle is
threaded from the left.
Adjust the needle thread tension by turning the adjusting wheel 1.
Move the machine to the last position prior to the threading.
or
Move the machine to home position.
1
+
-
To Next Page
Loading...
Need help?
General
