Set-up
33
9.07 Selecting a program number
Switch the machine on.
Call up the menu to input the program number.
Select the desired program number.
The program numbers are allocated as follows:
Program numbers 0 - 199: Single-point darts
Program numbers 200 - 299: Double-point darts
Program numbers 300 - 399: Tapered darts
Confirm the selection and leave the selection menu.
Description of further functions
Clear
This function sets the value to "0".
Arrow keys
These functions increase or decrease the value.
Esc
This function cancels the entry without the value entered being taken over.
Group selection
This function opens the menu to select or compile a program group, see chapter 9.08 Se-
lecting / compiling program groups.
...
To Next Page
Loading...
Need help?
General
