Set-up
34
9.08 Selecting / compiling program groups
9
.08.01 Selecting a program group
The corresponding group of seam programs can also be se lected instead of a program
number. This assumes that the individual seam program has been assigned to a group, see
chapter 9.08.02 Compiling a program group.
Switch the machine on.
Call up the menu to input the program number.
Call up the menu to input the group number.
Select the desired group number.
Confirm the selection and leave the selection menu.
Description of further functions
Clear
This function sets the value to "0".
Arrow keys
These functions increase or decrease the value.
Esc
This function cancels the entry without the value entered being taken over.
Program number selection
This functions opens the menu for selecting a seam program number, see chapter 9.07
Selecting a program number.
...