Set-up
35
9.08.02 Compiling a program group
Up to 10 seam programs can be assigned to a program group. The seam programs in a se-
lected program group appear as a function on the display when sewing and can be selected
directly.
Call up the menu to input the group number and select the desired group number with-
out leaving the selection menu, see chapter 9.08.01 Selecting a program group.
Call up group programming.
Compile a program group from the existing seam programs by entering the program
numbers on the number block.
The cursor in the window shows which seam program is removed from the group or at
which point a new seam program is inserted. The cursor can be moved with the arrow
keys.
Insert (INS) the seam program at the current cursor position or delete (DEL) a marked
seam program from the sequence, as required.
Conclude group programming.
0 - 399