Input
55
Description of the functions
Input mode
This function is used to change the initial status of input mode.
Update drives
This function is used to update (reimport) the drives.
Conclude input
This function is used to conclude the input and the machine switches to sewing mode.
Data selection
These functions are used to mark the desired files in the current drive. Individual files are
selected with the arrow keys. Several files can be selected at one time with the arrow keys
in combination with the lock key (S).
Copy
This function is used to copy the files selected from the current data carrier to the second
data carrier.
Delete
This function is used to delete the selected files.
MDAT/CONF
This function is used to call up the level for the configuration and machine data.
The current settings and the machine configuration are stored in the files "MDAT3519" and
"CONF3519. In this way, the machine data can be copied onto an SD card as a backup or
several machines with the same designation can be configured quickly by reading the ma-
chine data.
Format
This function is used to format the inserted SD card.
All data on the SD card is deleted in the course of the formatting process!
To Next Page
Loading...
Need help?
General
