Adjustment
68
Move the sewing head to the operating position.
Move the sewing head to its upright position using both hands!
Risk of crushing between the sewing head and the machine stand!
Move the sewing head to its upright position and push into the machine stand until it
stop.
Close the tensioning lever 5.
Fold down the support 4 and pivot the frame 3 downwards.
Push back the loading clamp until it stops.
Close the tensioning lever on the loading clamp.
Tighten the screws 2 and close the cover 1.
To Next Page
Loading...
Need help?
General
