User’s Manual of WGS Managed Series
WGS-4215-8T / WGS-4215-8T2S
Product WGS-4215-8T WGS-4215-8T2S
Hardware Specifications
Copper Ports 8 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots ---
2 x 100/1000BASE-X SFP interfaces
Supports 100/1000Mbps dual mode
and DDM
Switch Architecture Store-and-Forward
16Gbps/non-blocking 20Gbps/non-blocking
Switch Throughput@64Bytes 11.9Mpps 14.8Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
Power LED
Power (Green)
Power (Green)
RJ45 LED
1000 LNK/ACT (Green)
10/100 LNK/ACT (
)
1000 LNK/ACT (Green)
10/100 LNK/ACT (
)
SFP LED
N/A
1000 LNK/ACT (Green)
100 LNK/ACT (Amber)
Dimensions (W x D x H) 148 x 25 x 134 mm 178 x 25 x 134 mm
Weight 496g 663kg
Power Requirements
12V~48V DC,1A
24V AC,1A
12V~48V DC,1A
24V AC,1A
Power Consumption/
Dissipation
10 watts (max.)/
34 BTU
7.9 watts (max.)/
26 BTU
ESD Protection 6KV DC
Enclosure Metal
Layer 2 Functions
Port Mirroring
TX/RX/both
Many-to-1 monitor
VLAN
802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (protected port)
GVRP
Link Aggregation
IEEE 802.3ad LACP and static trunk
Supports 4 groups of 8-port trunk