User’s Manual of WGS Managed Series
4.9.7.7 Rate Limit
After enabling DHCP snooping, the switch will monitor all the DHCP messages and implement software transmission. The
DHCP Rate Limit Setting and Config screens in Figure 4-9-41 & Figure 4-9-42 appear.
Figure 4-9-41 DHCP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object Description
• Port
Select port from this drop-down list
• State
Set default or user-define
• Rate Limit (pps)
Configure the rate limit for the port policer. The default value is "unlimited". Valid
values are in the range 1 to 300.
Buttons
: Click to apply changes
Figure 4-9-42 DHCP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object Description
• Port
The switch port number of the logical port
• Rate Limit (pps)
Display the current rate limit
To Next Page
Loading...
