User’s Manual of WGS Managed Series
• Remote Server
Fill in your remote server IP address
• Write Delay
Specify the duration for which the transfer should be delayed after the binding
database changes. The range is from 15 to 86400 seconds. The default is 300
seconds (5 minutes).
• Timeout
Specify when to stop the database transfer process after the binding database
changes.
The range is from 0 to 86400. Use 0 for an infinite duration. The default is 300
seconds (5 minutes).
Buttons
: Click to apply changes.
Figure 4-9-40 DHCP Snooping Database Information Page Screenshot
The page includes the following fields:
Object Description
• Database Type
Display the current database type
• File Name
Display the current file name
• Remote Server
Display the current remote server
• Write Delay
Display the current write delay
• Timeout
Display the current timeout
To Next Page
Loading...
Need help?
General