User’s Manual of WGS Managed Series
The page includes the following fields:
Object Description
• Access Profile Name
(1-32 characters)
Indicates the access profile name
• Priority (1-65535)
Set priority
The allowed value is from 1 to 65535
• Management Method
Indicates the host can access the switch from
HTTP/HTTPs/telnet/SSH/SNMP/All interface that the host IP address matched
the entry.
• Action
An IP address can contain any combination of permit or deny rules.
(Default: Permit rules)Sets the access mode of the profile; either permit or
deny.
• Port
Select port from this drop-down list
• IP-Source
Indicates the IP address for the access management entry
Buttons
: Click to apply changes.
Figure 4-9-29 Profile Rule Table Page Screenshot
The page includes the following fields:
Object Description
• Access Profile Name
Display the current access profile name
• Priority
Display the current priority
• Management Method
Display the current management method
• Action
Display the current action
• Port
Display the current port list
• Source IPv4
Display the current source IPv4 address
• Source IPv4 Mask
Display the current source IPv4 mask