User’s Manual of WGS Managed Series
• End Hour
Allows user to set what hour PoE function does by disabling it.
• End Min
Allows user to set what minute PoE function does by disabling it.
• Reboot Enable
Allows user to enable or disable the whole PoE port reboot by PoE reboot schedule.
Please note that if you want PoE schedule and PoE reboot schedule to work at the
same time, please use this function, and don’t use Reboot Only function. This
function offers administrator to reboot PoE device at an indicated time if
administrator has this kind of requirement.
• Reboot Only
Allows user to reboot PoE function by PoE reboot schedule. Please note that if
administrator enables this function, PoE schedule will not set time to profile. This
function is just for PoE port to reset at an indicated time.
• Reboot Hour
Allows user to set what hour PoE reboots. This function is only for PoE reboot
schedule.
• Reboot Min
Allows user to set what minute PoE reboots. This function is only for PoE reboot
schedule.
Buttons
: Click to add new rule.
: Click to apply changes
: Check to delete the entry.
To Next Page
Loading...
Need help?
General