Planmeca ProMax Technical Manual

Chapter A - GENERAL & TECHNICAL DATA
A-2 Planmeca ProMax
MANUAL VERSIONS
Technical Manual
2 MANUAL VERSIONS
The installed software revision determines the available functions and behaviour of the unit. If
the unit is reporting error or help messages not listed in this manual, please refer to a newer
revision of the manual.
3 SYMBOLS ON PRODUCT LABELS
Type B applied part (Standard IEC 60601-1)
Alternating current (Standard IEC 60417)
Attention, consult accompanying documents (Standard IEC 60601-1)
X-ray source assembly: emitting (Standard IEC 60417)
Temple supports
Electrostatic sensitive device (Standard IEC 60417)
Separate collection for electrical and electronic equipment according to Directive 2002/96/EC
(WEEE)

Planmeca ProMax Specifications

General

Category	Medical Equipment
Type	Cone Beam Computed Tomography (CBCT) System
Software	Planmeca Romexis
Imaging Modes	CBCT
Imaging Modalities	2D Panoramic
X-ray Generator	High Frequency Generator
Focal Spot Size	0.5 mm
X-ray Tube Voltage	60-90 kV
Exposure Time	Varies depending on imaging mode and parameters
Dimensions	Varies significantly depending on model and configuration
Weight	Varies significantly depending on model and configuration
Power Requirements	50/60 Hz
Patient Positioning	seated