Planmeca ProMax Technical Manual

Chapter B - INFORMATION DISPLAYS
B-42 Planmeca ProMax
ENTERING THE PASSWORD
Technical Manual
8 ENTERING THE PASSWORD
The Service settings and Technical calibrations modes are password protected, and the
password is entered as follows. Touch the i field on the main display.
Figure 65
Select Service settings or Technical calibrations from the list on the display. The password
to the selected mode is asked when the mode is entered for the first time after switching the
unit on. The password is 1701.
Figure 66

Planmeca ProMax Specifications

General

Category	Medical Equipment
Type	Cone Beam Computed Tomography (CBCT) System
Software	Planmeca Romexis
Imaging Modes	CBCT
Imaging Modalities	2D Panoramic
X-ray Generator	High Frequency Generator
Focal Spot Size	0.5 mm
X-ray Tube Voltage	60-90 kV
Exposure Time	Varies depending on imaging mode and parameters
Dimensions	Varies significantly depending on model and configuration
Weight	Varies significantly depending on model and configuration
Power Requirements	50/60 Hz
Patient Positioning	seated