Planmeca ProMax Technical Manual

Chapter B - INFORMATION DISPLAYS
B-2 Planmeca ProMax
GENERAL ABOUT INFORMATION DISPLAYS
Technical Manual
1.1 Contents of the Information displays
i200 User preference settings
i210 Date & time
i220 Audio settings
i230 Behavioural preferences
i250 Visual adjustments
i260 Select language
i270 Default program settings
i300 Feature program control
i310 Enable/disable features
i400 Special functions
i410 Special operation mode selection
i420 Error history
i430 Exposure statistics
i460 Test exposure
i470 Beam check
i480 Network settings
i500 Service settings (password)
i510 Special operation mode selection
i520 Preheat calibration
i530 Maximum height
i540 Exposure program tuning
i560 Configuration selftest
i570 Select configuration
i580 Patient support alignment
i590 Software update
i600 Technical calibrations (password)
i610 Primary collimator calibration
i630 DEC calibration
i640 Positioning calibration
i650 Lift motor position sensor calibration
i660 Layer laser calibration
i670 QA Exposure
i680 DAP value adjustments
i999 Demo
i700 Troubleshooting (password)
i760 Communication

Planmeca ProMax Specifications

General

Category	Medical Equipment
Type	Cone Beam Computed Tomography (CBCT) System
Software	Planmeca Romexis
Imaging Modes	CBCT
Imaging Modalities	2D Panoramic
X-ray Generator	High Frequency Generator
Focal Spot Size	0.5 mm
X-ray Tube Voltage	60-90 kV
Exposure Time	Varies depending on imaging mode and parameters
Dimensions	Varies significantly depending on model and configuration
Weight	Varies significantly depending on model and configuration
Power Requirements	50/60 Hz
Patient Positioning	seated