Planmeca ProMax Technical Manual

Chapter B - INFORMATION DISPLAYS
B-4 Planmeca ProMax
USER PREFERENCE SETTINGS
Technical Manual
Set the correct time with the Hour and Minutes arrow fields. Store the new time by touching
the Done field, or exit the mode without storing changes by touching the Cancel field.
Figure 4
Set the correct date with the Year, Month and Day arrow fields. Store the new date by touch-
ing the Done field, or exit the mode without changes by touching the Cancel field.
Figure 5

Planmeca ProMax Specifications

General

Category	Medical Equipment
Type	Cone Beam Computed Tomography (CBCT) System
Software	Planmeca Romexis
Imaging Modes	CBCT
Imaging Modalities	2D Panoramic
X-ray Generator	High Frequency Generator
Focal Spot Size	0.5 mm
X-ray Tube Voltage	60-90 kV
Exposure Time	Varies depending on imaging mode and parameters
Dimensions	Varies significantly depending on model and configuration
Weight	Varies significantly depending on model and configuration
Power Requirements	50/60 Hz
Patient Positioning	seated