4.52
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
2. Connect the SmartLink Module cables to the PC and
vehicle. See “Digital Wrench® - Diagnostic
Connector”, page 4.48
3. Open the Digital Wrench® program.
4. Select the model year, product line and vehicle
description by selecting the “Change Vehicle Type”
icon.
5. Select the “Special Tests” icon.
6. Select “Engine Controller Reprogramming”.
7. Select the file you want to load into the ECU then
click the “Continue” icon to proceed to the Integrity
Check and obtain a Request Code.
8. Copy (CTRL +C) the Request Code that will be
required on the dealer website in the next step. DO
NOT CLOSE Digital Wrench® or the Request Code
will be invalid. NOTE: All characters are letters;
there are no numbers in a request code.
NOTE: Request Codes and Authorization Keys
must be entered EXACTLY as they appear on the
screen.
ELECTRONIC FUEL INJECTION
To Next Page
Loading...
